WhatsApp Support!
Search for:

Shop

Medilab Exports Consortium   →  Products   →  Wooden Lab Instruments

Wooden Lab Instruments

Showing all 42 results

  • Block and Tackle Pulley System Wooden Model

    Block & Tackle Pulley System

    SKU: 19901

    Read more

    Block & Tackle Pulley System

    A block and tackle or only tackle is a system of two or more pulleys with a rope or cable threaded between them, usually used to lift heavy loads. The pulleys are assembled to form blocks and then blocks are paired so that one is fixed and one moves with the load.

    SKU: 19901 Categories: ,
  • Inclined Plane Wooden Model

    Inclined Plane

    SKU: 19902

    Read more

    Inclined Plane

    An inclined plane, also known as a ramp, is a flat supporting surface tilted at an angle, with one end higher than the other. It is used as an aid for raising or lowering a load. Objects placed on an inclined plane accelerate due to an unbalanced force.

    SKU: 19902 Categories: ,
  • Fulcrum Balance Wooden Model

    Fulcrum Balance

    SKU: 19903

    Read more

    Fulcrum Balance

    It Helps in studying how changing the distance from the fulcrum changes the mechanical advantage. Students can figure out the balance point for a given set of masses.

    SKU: 19903 Categories: ,
  • Wedge System Wooden Model

    Wedge System

    SKU: 19904

    Read more

    Wedge System

    Wooden Wedge System used for splitting, lifting, or tightening, as to secure a hammerhead onto its handle. Along with the lever, wheel and axle, pulley, and screw, the wedge is considered one of the five simple machines.

    SKU: 19904 Categories: ,
  • Nut And Bolt Wooden Model

    Nut & Bolt

    SKU: 19905

    Read more

    Nut & Bolt

    Nut Bolts made up of Wooden Material. it fasten multiple parts together. Each type of nuts and bolts has a different purpose that they are best suited for.

    SKU: 19905 Categories: ,
  • Lever Wooden Model

    Lever

    SKU: 19906

    Read more

    Lever

    A lever usually is used to move or lift objects. Sometimes it is used to push against objects, but not actually move them. Levers can be used to exert a large force over a small distance at one end by exerting only a small force over a greater distance at the other.

    SKU: 19906 Categories: ,
  • Wheel and Axle Wooden Model

    Wheel & Axle

    SKU: 19907

    Read more

    Wheel & Axle

    This Wheel & axle made-up of wooden material. This Model can work as crane or for other uses.

    SKU: 19907 Categories: ,
  • Pendulum Wooden Model

    Pendulum

    SKU: 19908

    Read more

    Pendulum

    Wooden pendulum is attached to a pivot point so it can swing freely. This Pendulum is made up of wooden material.

    SKU: 19908 Categories: ,
  • Pulley System Wooden Model

    Pulley System

    SKU: 19909

    Read more

    Pulley System

    Pulleys are commonly used in shipping and marine applications, as well as for industrial equipment and machinery. Systems typically use multiple pulleys to increase mechanical advantage as it reduces the force needed to lift or pull the weight.

    SKU: 19909 Categories: ,
  • Pin hole Camera Wooden Model

    Pin-hole Camera

    SKU: 19910

    Read more

    Pin-hole Camera

    An inverted image is formed in a pinhole camera because the light rays coming from the top and bottom of the object intersect at the pinhole. The smaller the hole, the sharper the image up to a certain point, but the projected image is dimmer. The human eye in bright light is similar to a pinhole camera.

    SKU: 19910 Categories: ,
  • Test Tube Racks Wooden Model

    Test Tube Racks

    SKU: 19911

    Read more

    Test Tube Racks

    Wooden test tube rack to fit six test tubes. Test tubes not included. Made of strong and durable polished beechwood. Easy to clean. Built to last. The coloring of wood may vary slightly from the images shown.
    Designed for use in a science laboratory or classroom, but perfect for use in storing test tube shot glasses, ground spices, or toothbrushes.

    SKU: 19911 Categories: ,
  • Density Block for Cylinders Wooden Model

    Density block for Metal Cylinders

    SKU: 19912

    Read more

    Density block for Metal Cylinders

    The density block for Metal Cylinders includes a wooden storage block. Each has a different length but each cylinder has the same diameter.

    SKU: 19912 Categories: ,
  • Test Tube Racks Wooden Model

    Test Tube Racks

    SKU: 19913

    Read more

    Test Tube Racks

    MEDILAB WOODEN TEST TUBE RACKS  are used to hold multiple test tubes at the same time. Test tube racks come in a variety of sizes, and compositions.

    SKU: 19913 Categories: ,
  • Test Tube Racks Wooden Model

    Test Tube Racks

    SKU: 19914

    Read more

    Test Tube Racks

    MEDILAB WOODEN TEST TUBE RACKS  are used to hold multiple test tubes at the same time. Test tube racks come in a variety of sizes, and compositions.

    SKU: 19914 Categories: ,
  • Loop Wooden Model

    Loop

    SKU: 19915

    Read more

    Loop
    SKU: 19915 Categories: ,
  • Dvs Box Wooden Model

    DVS Box

    SKU: 19916

    Read more

    DVS Box
    SKU: 19916 Categories: ,
  • Tuning Fork Box Wooden Model)

    Tuning Fork Box

    SKU: 19917

    Read more

    Tuning Fork Box

    Tuning Fork set of 8 in a wooden case. Tuning forks are individually constructed of forget steel.

    SKU: 19917 Categories: ,
  • Resonance box Wooden Model

    Resonance Box

    SKU: 19918

    Read more

    Resonance Box

    Resonance boxes are instruments for amplifying sound from a tuning fork. These boxes are constructed from wooden material and feature an A4 tuning fork mounted directly to the box.

    SKU: 19918 Categories: ,
  • Resonance Box Wooden Model

    Resonance Box

    SKU: 19919

    Read more

    Resonance Box

    Resonance boxes are instruments for amplifying sound from a tuning fork. These boxes are constructed from wooden material and feature an A4 tuning fork mounted directly to the box.

    SKU: 19919 Categories: ,
  • Density Cubes Box Wooden Model

    Density Cubes – Box

    SKU: 19920

    Read more

    Density Cubes – Box

    Density Cubes are a set of 12 same-size cubes of different materials used to compare the density and other physical properties.

    SKU: 19920 Categories: ,
  • Funnel Stand Wooden Model

    Funnel Stand

    SKU: 19921

    Read more

    Funnel Stand

    Made of Wooden with a clamping screw. Type for 1 funnel  Custom-made sizes is available on demand. Modification is possible as per requirements.

    SKU: 19921 Categories: ,
  • Double Funnel Stand Wooden Model

    Double Funnel Stand

    SKU: 19922

    Read more

    Double Funnel Stand

    Made of Wooden with a clamping screw. Type for 2 funnel  Custom-made sizes is available on demand. Modification is possible as per requirements.

    SKU: 19922 Categories: ,
  • Weights Box Wooden Model

    Weights Box

    SKU: 19923

    Read more

    Weights Box

    Wooden Wights Box is made of Brass Material, with nickel-plated surface. It contains a total of 9 weights from 1 to 100 grams in a wooden box.

    SKU: 19923 Categories: ,
  • Burette Stand Wooden Model

    Burette Stand

    SKU: 19924

    Read more

    Burette Stand

    This Bureete Stand is used for a single type Burette. It is completely made of wooden material with moulded plastic clamping screws.

    SKU: 19924 Categories: ,
  • Lens Box Wooden Model

    Lens Box

    SKU: 19925

    Read more

    Lens Box

    These boxes are used to store different contact lenses prescribed by the opitician. These boxes are made up of using Best quality wood. The material used is damage resistant and do not break or damage easily.

    SKU: 19925 Categories: ,
  • Bottle Stand Wooden Model

    Bottle Stand

    SKU: 19926

    Read more

    Bottle Stand

    Wooden Bottles are made up of the best quality wood material. It contains 6 holes with same size and diameter. It is perfect for science labs and home laboratories.

    SKU: 19926 Categories: ,
  • Lens holder Wooden

    Lens Holder

    SKU: 19927

    Read more

    Lens Holder

    A wooden Lens Holder is used to hold lenses and make them safe. It can securely hold different sizes and types of lenses and mirrors.

    SKU: 19927 Categories: ,
  • Weight Box Wooden Model

    Weight Box

    SKU: 19928

    Read more

    Weight Box

    Wooden Wights Box is made of Brass Material, with the nickel-plated surface. It contains a total of 9 weights from 1 to 100 grams in a wooden box.

    SKU: 19928 Categories: ,
  • Weight Block Wooden

    Weight Block

    SKU: 19929

    Read more

    Weight Block

    Wooden Weight Block is easy to handle contoured shapes. It contains 12 Holes in a Wooden shape box. Wooden Material is used in Wooden Weight Block.

    SKU: 19929 Categories: ,
  • Scale Stand Wooden Model

    Scale Stand

    SKU: 19930

    Read more

    Scale Stand
    SKU: 19930 Categories: ,
  • Block Wooden Model

    Block

    SKU: 19931

    Read more

    Block
    SKU: 19931 Categories: ,
  • Photometer Base Wooden Model

    Photometer Base

    SKU: 19932

    Read more

    Photometer Base

    A wooden photometer is used to measure optical brightness within a single field of view.

    SKU: 19932 Categories: ,
  • Pipette Stand Wooden Model

    Pipette Stand

    SKU: 19933

    Read more

    Pipette Stand

    It supports up to 12 Pipettes. This Wooden Pipette Rack Holds Pipettes horizontally and also allows items to fully dry. It is made up of Wooden materials.

    SKU: 19933 Categories: ,
  • Pipette Stand Wooden Model

    Pipette Stand

    SKU: 19934

    Read more

    Pipette Stand

    It supports up to 12 Pipettes. This Wooden Pipette Rack Holds Pipettes Vertically and also allows items to fully dry. It is made up of Wooden materials.

    SKU: 19934 Categories: ,
  • Test tube Rack Wooden Model

    Test Tube Rack

    SKU: 19935

    Read more

    Test Tube Rack

    This Test Tube Rack holds up to 12 Test Tubes for use in schools and laboratories. Each row of the rack holds 6 Test tubes. using wooden material makes construction durable & wipes easily.

    SKU: 19935 Categories: ,
  • Test tube Rack Wooden Model

    Test tube Rack

    SKU: 19936

    Read more

    Test tube Rack

    This Test Tube Rack holds up to 6 Test Tubes for use in schools and laboratories. using wooden material makes construction durable & wipes easily.

    SKU: 19936 Categories: ,
  • Periscope Wooden

    Periscope

    SKU: 19937

    Read more

    Periscope

    It is Z in a square shape with both protecting arms having plane mirrors mounted at 45 degrees facing each other.

    SKU: 19937 Categories: ,
  • Test Tube Block Wooden Model

    Test Tube Block

    SKU: 19938

    Read more

    Test Tube Block

    These MEDILAB Test Tube Rack are constructed from solid wood material. It contains 15 slotted holes accommodating tubes up to 12mm in dia.

    SKU: 19938 Categories: ,
  • Pipette Rack Wooden Model

    Pipette Rack

    SKU: 19939

    Read more

    Pipette Rack

    It supports up to 24 Pipettes. This Wooden Pipette Rack Holds Pipettes Vertically and also allows items to fully dry. It is made up of Wooden materials.

    SKU: 19939 Categories: ,
  • Wooden Test Tube Stand

    Test tube Stand

    SKU: 19940

    Read more

    Test tube Stand

    MEDILAB TEST TUBE STAND is used to hold many test tubes upright at the same time. It contains 6 holes in a rack.

    SKU: 19940 Categories: ,
  • Three-Layer Test Tube Stand Wooden Model

    Three Layer Test Tube Stand

    SKU: 19941

    Read more

    Three Layer Test Tube Stand

    These Racks are divided into three layers. It is made up of wooden material. It consists of 7 holes in a stand. Modification can also be done as per requirement.

    SKU: 19941 Categories: ,
  • Wooden Trolley Wooden Model

    Wooden Trolley

    SKU: 19942

    Read more

    Wooden Trolley

    In Wooden Trolley A tough laminated surface mounted on each trolley enables the placing of additional masses for increasing the effective weight of the trolley

    SKU: 19942 Categories: ,

Wooden labware refers to laboratory equipment and apparatus made of wood, such as beakers, test tube holders, and stirring rods. It is commonly used in laboratory settings for a variety of purposes, including mixing, heating, and storing liquids and materials.

Advantages of Wooden Labware:

  1. Inexpensive and readily available
  2. Easy to handle and clean
  3. Biodegradable and environmentally friendly
  4. Good insulation properties
  5. Naturally resistant to chemicals

Types of Wooden Labware:

  1. Wooden stir sticks
  2. Wooden test tube holders
  3. Wooden beakers
  4. Wooden spatulas
  5. Wooden lab tongs

Wooden labware is commonly used in educational and research settings, as well as in traditional or folk medicine practices where natural materials are preferred. However, it should be noted that wooden labware is not suitable for use with highly reactive or corrosive chemicals, and it may be prone to warping or cracking if exposed to high temperatures or humid environments. The selection of wooden labware depends on the specific requirements of the experiment and the intended use.