This Burette has a transparent acrylic body and a leakproof stopcock
made fitted with a self lubricating PTFE plug. Each Burette is
individually calibrated to give maximum accuracy. Acrylic body is
unaffected by dilute mineral acids & bases except Hydrofloric Acid &
Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used
up to 5% wt/wt of acids or 30% bases.
Material : Polymethyl Methacrylate/TPX
A fast release pipetting device for precise pipetting & zip quick
emptying. The Knurled thumbwheel can be rotated to draw up or
dispense liquids while the releaser may be pushed in for zip-quick
emptying. The moulded chuck has a silicon rubber collet inside to hold
various pipettes of standard sizes. It resists acids & alkalies and can be
easily disassembled for thorough cleaning.
Material : Acrylonitrile Butadiene Styrene
This detachable Stand can hold 12 pipettes, 6 on each side, in a horizontal
position. This autoclavable stand has two sides which are attached to each
other with three metallic rods. This stand can be easily disassembled for
space saving storage.
Material : Polypropylene
This is a stable, non-corrosive, detachable Stand which can hold 28
pipettes with maximum dia 14 mm. The heavy base measures 225 mm
in diameter and a Polypropylene coated square rod measuring 375 mm
in length is screwed into the base. The top disc that can be fixed on the
rod has holes for holding pipettes while the lower one has pilot holes
where the pipette tips rest and liquids drain down to the base. These
discs can be adjusted on the rod according to the length of the pipette.
The arrows provided on the discs should be kept parallel to ensure that
corresponding holes are being centered.
Material : Polypropylene
This unique Stand holds a maximum of 94 pipettes and rotates on a
central vertical axis for convenient selection of any particular pipette.
The lower rotating disc has four concentric troughs with tapered sides
and open bottoms which cradle the pipette tips protectively and permit
water drops to run off. The upper disc has a grid pattern concentric with
the bottom disc and keeps the pipettes vertical. Liquids draining off the
pipettes are retained on the top of the stationary base by the outer ring.
This stand can be easily disassembled & reassembled.
Material : Polypropylene
